LPT100-M Series

80—130 Watt AC-DC Medical Power Supplies

The LPT100-M series of triple output open-frame AC-DC power supplies features ITE and medical safety approvals. There is a choice of four models, covering output voltages from 3.3 V to 24 V. The power supplies have a typical full load power conversion efficiency of 82% and with a height of only 1.28 inches offer a power density in excess of 12 watts per cubic inch. LPT100-M power supplies are primarily designed for use in information technology equipment (ITE) and light industrial systems, as well as for equipment intended for non-patient contact and non-patient critical use in low power medical, dental and laboratory applications.

기술 데이터시트 보도 자료 서화 제품 교육 매뉴얼 이 페이지 인쇄
  • 총 최대 전력:
    130 W
  • 총 최대 전류:
    18 A
  • 입력 전압:
    90 V to 264 V
  • 출력 전압:
    -16.5 V - 28.8 V
  • 출력:
    Triple
  • 크기(L x W x H):
    4.000" x 2.000" x 1.280"
  • 보증
    2 years
  • 작동 온도:
    -20°C to +70°C

Electrical Specifications

  • Input
  • Output
  • Frequency: 47 - 63 Hz
  • Inrush current: 50 A max., cold start @ 25°C
  • Efficiency: 82% typical at full load
  • Input range: 90 - 264 VAC, 120 - 300 VDC
  • Safety ground leakage current: 275 uA @ 50/60 Hz, 264 VAC input
  • Power fail: Active low TTL logic signal
  • Adjustment range: All outputs -40% to +10% except for 24 V
  • Overload protection: Short circuit and case overload protected
  • Hold-up time: 10 ms @ 130 W load, 120 VAC input
  • Remote Sense: Compensates for 0.5 V lead drop on main output
  • Medical and ITE safeties
  • Active power factor correction
  • 2 x 4 x 1U form factor
  • Overload protection
  • Built-in Class B EMI filter
  • Remote sense
  • EN61000-3-2 compliant
  • Adjustable outputs
  • Power fail
  • Thermal overload protection
  • Overvoltage protection

고객 제품 선택에 대한 당사의 지원

요건 별 새로운 검색

Sales Support
☒ Close