DS1050 시리즈

1050 Watt Front End AC-DC Power Supplies

The DS1050 series bulk front end AC-DC power supply accepts a wide range 90–264 Vac input and provides a main 12 V output plus a 3.3 V or 5 V standby output. Rated at 1,050 watts it is an 80 Plus Gold supply with a high half-load efficiency of 92%. Housed in an industry standard 1U x 2U rack-mounting package, the power supply is ideal for space-constrained applications. This series comes in two airflow versions – dc-connector to ac-connector and vice versa.

The main 12 V output can deliver up to 87 amps and stays within regulation down to zero load, making it perfect for feeding downstream DC-DC converters in systems that use distributed power architectures (DPA). Standard features include active current sharing, internal ORing FETs and an EEPROM for storing service data to facilitate efficient field replacement. The power supply is hot pluggable and ideal for fault tolerant and N+1 redundant applications.

This digitally-controlled power supply is PMBus™ compliant. A built-in I2C serial interface allows set-up, monitoring and control to be performed using Artesyn Embedded Power' universal PMBus graphical user interface.

Universal PMBus GUI Software Package

기술 데이터시트 서화 이 페이지 인쇄
  • 총 최대 전력:
    1,050 W
  • 총 최대 전류:
    87 A
  • 입력 전압:
    90 V to 264 V
  • 출력 전압:
    12 V - 12 V
  • 출력:
  • 크기(L x W x H):
    11.000" x 3.200" x 1.570"
  • 보증
    2 years
  • 작동 온도:
    -10°C to +50°C

Electrical Specifications

  • Input
  • Output
  • Logic Control
  • Leakage Current: 1.40 mA @ 240VAC
  • Efficiency: > 92% typical at high line 50% load
  • Inrush Current: 40Apk Max
  • Frequency: 47-63 Hz Single Phase AC
  • Input Range: 90-264 VAC
  • Power Factor: 0.99 Typical
  • Hold-up Time: 12 mSec Min
  • Main DC Voltage: 12VDC @ 87 A
  • Turn-on Delay: 2 Second Max, Monotonic Rise
  • Regulation: +/- 5% on Main; +/- 5% on Stand-By
  • Adjustment Range: +/- 5% on Main output using I2C
  • Stand-By Voltage: 3.3VDC @ 4 A (5VDC @ 2.5 A available)
  • PWR GOOD: TTL High with supply is in Regulatioin
  • PS_Seated: TTL Low when supply is inserted in system
  • PS_Inhibit: TTL Low supply is enabled on
  • 능동적인 역률 개선 회로
  • EN61000-3-2 고조파 준수
  • 능동적인 AC 돌입 제어
  • Standard 1U x 2U form factor
  • High Density 19 Watts/cu-in
  • +12Vdc Output
  • +3.3 or 5.0 Vdc stand-by
  • No Minimum load required
  • Hot-plug operation
  • N+1 Redundant
  • Internal OR'ing FET's
  • Active current sharing
  • Built-in "Smart" fan
  • INTEL, SSI std. logic timing
  • EEPROM for FRU data
  • PMBus compliant
  • Full Digital Control
  • 80+ Gold Efficiency Standard

고객 제품 선택에 대한 당사의 지원

요건 별 새로운 검색

Sales Support
☒ Close