콘텐츠로 건너뛰기
ARTESYN™

Intelligent Transfer Switch

Active

Up To 24000 W

Advanced Energy's Artesyn Intelligent Transfer Switch (iTS™) is designed for any application needing power switched to different loads during a 24 hour period (i.e. Horticulture, Burn-in, Test and Measurement, etc.). Advanced Energy’s Intelligent Transfer Switch has a built-in PSU to supply power to the relays and MCU module. It is designed to operate with 2 phases of a 3-PH input mains up to 480 VAC nominal, or standard Phase and Neutral of single-phase mains.

특징

  • 100% digital control
  • 5 years manufacturer's warranty
  • Designed for use with iHP and LCM4000 product families
  • Digital communication via RS485 (ModbusRTU)
  • Modular 8 channel A:B switch
  • MTBF 400K hours per Telecordia SR332 Method 1 Case 4, Part Stress
  • Standard 19" rack
  • Up to 16 racks are addressable from one control node
  • Input Voltage - Control 186-480 Vac Nominal; 1 or 2 phase
  • Input Voltage - Relay Module 250V nominal contact rating per module
  • Input Current - Relay Module 25A max contact rating per module
  • Input Frequency - Control 50/60 Hz Nominal
  • # of Relay Modules Up to 8
  • Relay Coil from Control 12Vdc @ 1A for up to 8 relay modules (96W max)
  • FAULT_1 (OUTPUT) Low asserted to trigger fault if coil voltage >5V
  • FAULT_2 (OUTPUT) Low asserted to trigger if outputs A and B active
  • EMC/IMMUNITY EN61000-4-X (see datasheet)
  • Primary-to-EARTH 2500Vdc
  • Primary-to-Secondary 2500Vdc
  • Secondary-to-Earth 2500Vdc
  • 19 changeable from front to back

혜택

  • Cloud based User configurable GUI
  • Configurable baud rate
  • Field upgradeable firmware
  • Intelligent zero current switching when used with Artesyn devices
  • Natural convection cooled (No Fan)
  • Reversable mounting tabs
  • PRESENT (OUTPUT) Low asserted if relay module present
  • Drive_A (INPUT) High asserted to drive relay to A position
  • Drive_B (INPUT) High asserted to drive relay to B position
  • SGND (OUTPUT) Digital ground reference for MCU

사양

출력 전력(W): 24000
길이(인치): 12.6
너비(인치): 17.6
높이(인치): 3.15
마운팅 유형: Configurable
최소 출력 전류(A): 0
최대 출력 전류(A): 200
최소 출력 전력(W): 0
모든 사양 사양 축소

ConfigPro 소개하기

Advanced Energy의
혁신적인 온라인 Power Configurator

3백만 개 이상의 구성 가능한 전원 공급 장치 조합을 갖춘 이 전원 솔루션 알고리즘은 비용을 최적화하고 MP, IMP, IVS 및 MICROMP(UMP) 구성 가능한 전원 공급 장치 제품군에 이상적인 솔루션을 안내합니다.
시작하기

기술 문서

24시간 (24/5) 고객 지원

전문 엔지니어의 기술지원을 받아보세요.

저희는 고객에게 우수한 고객 서비스와 기술 지원을 제공하기 위해 최선을 다하고 있습니다. 실시간 채팅 및 전화 지원을 통해 언제든지 자격을 갖춘 엔지니어에게 도움을 요청할 수 있습니다.
지금 지원 받기