.svg){kind=logo}
ARTESYN™
AVO100-48S28 Series
Active
100 W Isolated DC-DC Converters For RF Applications
With a high full-load efficiency of 92% and an operating temperature of -40 to 85˚C ambient, the AVO100-48S28 series is ideally suited for RF power amplifiers in small-cell and low-power telecommunications applications. This series of eight-brick isolated DC-DC converters output a low noise regulated 28 VDC and 3.57 output current from an input of 36 to 75 VDC. These 100 W DC-DC converters for RF applications deliver full power (no minimum load requirement) with a trimmable output to meet your needs. Their high-power density open-frame design, with an optional baseplate 0.5 inches high, has an industry-standard footprint and pin-out. Switching at 280 kHz and EN55022 Class A-compliant, the converters also offer differential remote sense and remote on/off, as well as protection against overcurrent, overvoltage, and overtemperature.
특징
- Input voltage 36 to 75Vdc
- Output voltage 28V
- Output current 3.57A
- Isolation 1500Vdc
혜택
- Enable polarity Positive or Negative enable
- Insulation Basic Insulation
- Mechanical construction Baseplate or Openframe
- Termination through-hole mounted
사양
| 출력 전력(W): | 100 |
|---|---|
| 길이(인치): | 2.28 |
| 너비(인치): | 0.9 |
| 높이(인치): | 0.394 |
| 마운팅 유형: | BMP; Through Hole |
| 최소 출력 전류(A): | 0 |
| 최대 출력 전류(A): | 3.57 |
| 출력 전압 범위(V): | 18V to 32.5V |
기술 문서
24시간 (24/5) 고객 지원
전문 엔지니어의 기술지원을 받아보세요.
저희는 고객에게 우수한 고객 서비스와 기술 지원을 제공하기 위해 최선을 다하고 있습니다. 실시간 채팅 및 전화 지원을 통해 언제든지 자격을 갖춘 엔지니어에게 도움을 요청할 수 있습니다.
지금 지원 받기