LGA80D Demo Kit Series

Evaluation board for LGA80D

Artesyn’s LGA80D evaluation kit gives you the ability to connect the demonstration board to a USB socket on a PC, with the PMbus interface, dongle and cable provided in the kit and control and monitor the LGA80D units as they would be used in an application.

There are hardware functions on the demonstration board that allow you to enable and select an output voltage by simple dip-switch settings, and the board provides voltage and ripple measurement points.

The connections to the evaluation board are via M6 screws, with the only provision being that the input voltage is in the 7.5 V to 14 V range. The output connections use the same M6 screws, however, if you want to connect the outputs in parallel or you wish to stack the modules, they are placed in such a way to make the operation of placing a link between them as easy as possible. The demonstration board is populated with two LGA80D modules, allowing you to test independent channel or stacked-module operation.

LGA Evaluation Graphic User Interface

Visit LGA80D Series page Datasheet Brochures Technical Documentation Print this page

Product Training Manual Videos

LGA80D Product Training Module

Product Training Manual Videos
  • Total Max Power:
    400 W
  • Total Max Current:
    160 A
  • Input Voltage:
    7.5 V to 14 V
  • Output Voltage:
    0.6 V to 5.2 V
  • Outputs:
  • Warranty:
    2 years
  • Operating Temperature:

Electrical Specifications

  • Input
  • Output
  • Logic Control
  • Isolation
  • Other
  • Input voltage: 7.5Vdc to 14Vdc
  • Output voltage: 0.6V to 5.2V
  • output V3: 80A maximum
  • output V2: 40A maximum
  • output V1: 40A maximum
  • Output: 160A if stacked together
  • Control: PMBus interface
  • control: DIP switch voltage setting
  • Isolation : Non-isolated.
  • Connections: M6 ring terminals for power
  • 5.0V/3.3V dual outputs
  • Enable (on/off)
  • Output loadsharing
  • Industry standard pin-out
  • Trim feature, both rails
  • 100°C Baseplate temperature
  • Unencapsulated 2.3" x 2.4" x 0.50" pkg.
  • 48VDC Input
  • Thermal protection

고객 제품 선택에 대한 당사의 지원

당사에 이메일을 보내거나 +82-2-6004-3266 / +82-10-9036-8663 로 전화한다

요건 별 새로운 검색

Sales Support
☒ Close