.svg){kind=logo}
ARTESYN™
ADH700 Series
Active
700 W 1/2 Brick
The ADH700 series half-brick isolated DC-DC converter provides a single regulated 28 V/25 A or 50 V/14 A low-noise 700 W output with >95% efficiency at half load. With an input range of 36 to 75 VDC, the series is designed primarily for standard 48 V telecom equipment, such as remote radio head (RRH) applications. A fixed 280 kHz switching frequency minimizes external EMI filtering requirements. An open-frame design with an aluminum thermal baseplate is optimized for conduction or forced air cooling. You can operate the ADH700 converters over -40 to +85˚C ambient and with full power delivery up to a baseplate temperature of 100˚C. Helping you meet demanding inter-board spacing requirements, the converters feature an installed height of just 0.5 inch (12.7 mm).
특징
- 36 65 Vdc Telecom input range
- 700 W continuous power
- RoHS 6 compliant
- Trim function: 50% ~118%
- UL94 V0 materials
- Ultra high efficiency 95% @ 100% load
- Input voltage 36V - 75 Vdc
- Output voltage 28 Volts
- Output current 25 Amps
- Output voltage 50 Volts
- Output current 14 Amps
- Isolation 1500 Vdc (ADH700-48S28)
- Isolation 2250 Vdc (ADH700-48S50)
- mechanical outline standard 1/2 brick
혜택
- Contact cooling or heatsink mounting
- Excellent thermal performance
- Fixed switching frequency
- Fully regulated output voltage
- High reliability
- Industry standard halfbrick
- Low ripple and noise
- No minimum load requirement
- Output overcurrent protection
- Output overvoltage protection
- Output shortcircuit protection
- Overtemperature protection
- Remote control function
- Remote output sense
- logic control - analogue Positive or Negative enable
- insulation Basic insulation
- insulation Basic insulation
사양
| 출력 전력(W): | 700 |
|---|---|
| 길이(인치): | 2.4 |
| 너비(인치): | 2.3 |
| 높이(인치): | 0.5 |
| 마운팅 유형: | BMP; Through Hole |
| 최소 출력 전류(A): | 0 |
| 최대 출력 전류(A): | 28 |
| 출력 전압 범위(V): | 14V to 57V |
기술 문서
기술 동영상
50V DC-DC Product Training Module
11월 5, 2019
This 5-minute training video provides and overview of power conversion solutions for powering 50V-nominal GaN (Gallium Nitride) radio frequency power amplifiers for wireless telecom antennas.
It outlines the different power ratings required for RF power amplifier applications, provides details of the solutions that Artesyn can provide, review the challenges of the applications & how they are addressed by Artesyn and finally highlight the products and their respective specifications.
Close Popup
관련 애플리케이션
모든 애플리케이션 살펴보기
24시간 (24/5) 고객 지원
전문 엔지니어의 기술지원을 받아보세요.
저희는 고객에게 우수한 고객 서비스와 기술 지원을 제공하기 위해 최선을 다하고 있습니다. 실시간 채팅 및 전화 지원을 통해 언제든지 자격을 갖춘 엔지니어에게 도움을 요청할 수 있습니다.
지금 지원 받기